Need Help - Hoover air revolve Manual Del Usuario

Need Help?

If a minor problem occurs, it usually can be solved quite easily when
the cause is found by using the checklist below. Any other servicing
should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged,
left outdoors, or dropped into water, take it to a service center prior to
continuing use.
My Air™ Revolve won't run.
Always be sure to plug it in firmly. A Thermal Protector may have
been activated—unplug and let vacuum cool for 30 min. Check for
clogs too. If this doesn't work, there may be no voltage in the wall
plug. Check fuse or breaker in home. If there is a blown fuse or
tripped breaker, replace fuse or reset breaker in home.
If your Air™ Revolve turns off.
A Thermal Protector may have been activated. First, turn off and
unplug. Empty Dirt Cup then inspect hose, filters for obstructions.
Thermal Protector should deactivate in 30 minutes. (See page 1)
My Air™ Revolve isn't picking up well.
Be sure to empty if the dirt cup is full. You may have a clogged filter.
Lift the filters out of the dirt cup. Rinse with clear warm water for two
minutes. Let them dry for at least 24 hours before reinstalling. (See
page 9)
13
If your filter was dirty...
You may also have a clog in the system. Unhook the hose to search
for a clog. If found, remove the clog. (See page 10)
!
To reduce the risk of personal injury –Unplug
vacuum before cleaning or servicing.
QUESTIONS OR CONCERNS?
Contact Us: (800)-944-9200
For a Complete Troubleshooting Guide, see: Hooverhelp.com/AirRevolve
Facebook: facebook.com/hoover
Do not return to store. See back of product for model number.
WARNING
!
Twitter: @HooverUSA