Before Use - Kiwi KFAN 7640 Manual Del Uso

BEFORE USE

• Take the appliance and accessories out the box. Remove the stickers, protective foil or plastic from
the device.
• Before using your appliance for the first time, wipe off all removable parts with a damp cloth. Never
use abrasive products.
• Put the power cable into the socket. (Note: Make sure the voltage which is indicated on the device
matches the local voltage before connecting the device. Voltage 220V-240V 50/60Hz)
PARTS DECRIPTION
3
1
1. Spray cap
2. Corrugated hose
3. Front grill
4. Screw (ST3*7.5)
5. Net clamp
6. Blade nut
7. Blade
8. Guard nut
9. Rear grill
TECHNICAL DATA
Diameter
Max. power consumption
MOUNTING
• Insert the connecting wire and the post into the main unit then tighten the fastening knob ensure to
drive the screw into the positioning hole.
• Press the wheels into the base.
• Put screw (M5 * 20) through the base, and fix the base to the main unit bottom.
• Mount the rear grill, grill nut, blade, blade nut and net clamp.
• Press the spray cap into the corrugated hose, and fix the spray cap with screws on the front grill.
• Mount the front grill into the net clamp, screw in the net clamp and then tighten the screws. Mount
the corrugated hose on the top of the main unit.
4 6 7 8
5
2
10. Post
11. Tightening knob
12. Main unit
13. Base
14. Wheels
15. Screw (M5*20)
16. Water tank
17. Control panel
18. Remote control
: 16 inch / 40 cm
: 90 W
7
KFAN 7640 User Manual
9
17
12
18
15
10
11
16
13
14