Listening To Digital Or Fm Radio - auna Scala VCD Manual De Instrucciones

LISTENING TO DIGITAL OR FM RADIO

Changing digital DAB stations
1. Press the MODE button on main unit or remote control and turn and
press the NAVIGATE dial to select 'DAB radio' from the Home screen. The
first time you select DAB radio,DAB will perform an auto tune to find all
available stations and will tune into one when finished.
2. Press and hold the Menu button on main unit or remote control Select to
station List
3. Press the OK Button on main unit or remote control to change the
station.
Changing FM stations
Seek tuning
Press the NAVIGATE dial or the TUNE
to seek to the next or previous FM radio station that has a strong signal. If
you are using the remote control press the TUNE
the remote control to seek to the next or previous station.
Manual tuning
Turn the NAVIGATE dial right or left or press the TUNE
on the front panel to step up or down 0.05 MHz. If you are using the remote
control press the TUNE UNE
MHz.
AUTO Scan
You can use the scan (auto tune) function to automatically scan for new
digital radio stations and remove inactive ones.
To carry out an auto tune:
Press the SCAN button on main unit or remote control to choose 'Scan'.The
number of stations found will be displayed during the auto tune . When the
auto tune has finished, will tune to the last station that you were listening
to. If the last station you were listening to is no longer available, will tune
into the first station in the alphabetical list.
Storing a preset
You can store up to 30 DAB and 30 FM for quick access.
To quick-store a station to a preset button (1-10)
Tune to the DAB or FM radio station you want to store. Press and hold one
of the numbered Preset buttons (1-10) on remote control for two seconds
until you see a message to confirm that the preset has been stored.
‹ ›
or TUNE Button on the front panel
‹
‹ ›
or TUNE buttons to step up or down 0.05
›
or TUNE buttons on
‹ ›
or TUNE buttons
EN
49