auna Scala VCD Manual De Instrucciones página 57

Prune invalid
To remove inactive stations from the station list:
1. Press and hold the Menu button on main unit or remote control and turn
and press the Select dial to select 'Main Menu.
2. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to choose 'Prune invalid'.
3. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to choose 'Yes'.will remove all inactive stations from the
station list.
Dynamic range control
Dynamic Range Control (DRC) is used to make quieter sounds in a digital
radio broadcast easier to hear at low volume or in a noisy environment.
Check with the broadcasters to find out if they use DRC.
To change the DRC settings:
1. Press and hold the Menu button on main unit or remote control and turn
and press the Select dial to select 'Main Menu..
2. Turn and press the Select dial or use the <OK> buttons on the remote
control to choose 'DRC'.
3. Turn and press the NAVIGATE dial or use the <OK> buttons on the
remote control to choose between one of the following options:
DRC high: Applies maximum compression to the DRC level.
DRC low: Applies reduced compression to the DRC level.
DRC off: Removes DRC compression.
EN
57