Using The Auxiliary Input - auna Scala VCD Manual De Instrucciones

EN
50
To store a station to the preset list (11-30)
1. Tune to the DAB or FM radio station you want to store.
2. Hold the PROG button on main unit or remote control to view the
numerical list of stored presets, then turn and press the NAVIGATE dial
∨
or use the Select
number between 11 and 30. You can overwrite existing presets.
3. Press the OK button on main unit or remote control to store the preset
To recall a preset when listening to digital or FM radio.
1. To tune to Presets 1 to 10, press the corresponding numbered button on
the front panel or on the remote control (1 to 10).
2. To access presets 11 to 30 using the remote control, press and release the
PROG button and use the Select buttons to scroll and select a preset.
3. Press the OK button on main unit or remote control to store the preset.

USING THE AUXILIARY INPUT

You can use the auxiliary input play any music from your phone or tablet.
Connecting an auxiliary device
Connect the line out or headphone socket of your auxiliary device to the Aux
In socket using a suitable cable.
Selecting the auxiliary input
1. Press the MODE button on main unit or remote control to select 'Aux In'
from the Home screen.
2. On your auxiliary device, start to play the content that you selected on
your auxiliary device.
Using the bluetooth input
You can use Bluetooth to wirelessly connect to a device, such as a mobile
phone or tablet. You can then stream music from your mobile phone or
tablet through.
The first time you connect a Bluetooth device, you need to pair them. After
you've paired a device , remembers it for the next time.
Listening to a Bluetooth device
1. Press the MODE button on main unit or remote control to select
'Bluetooth'.
2. On your Bluetooth device auna Scala VCD, switch Bluetooth on and
connect.
∧
buttons on the remote control to choose any Preset