Technical Data - Skil F0150770 Manual Original

Shredder
INTRODUCTION
• This tool is not intended for professional use
• This tool is intended for cutting fibrous and woody garden
waste for composting
• Check whether the packaging contains all parts as
illustrated in drawing 2
• When parts are missing or damaged, please contact your
dealer
• Read this instruction manual carefully before use and
save it for future reference 3
• Pay special attention to the safety instructions and
warnings; failure to follow these may result in
serious injury

TECHNICAL DATA 1

✱) The S6 operating mode (P40 = 40%) indicates a load
profile of 4 min load and 6 min idle time (for practical
application, continuous operation is permitted)
TOOL ELEMENTS 2
A Wrench (2)
B Collection bag
C Outlet
D Prodder holder
E On/off switch
F Securing knob
G Button for restarting
H Feed intake opening
J Ventilation slots
K Prodder
L Hex key
M Metal plate
N Safety lock
P Protective guard
SAFETY
EXPLANATION OF SYMBOLS ON TOOL
3 Read the instruction manual before use
4 Switch off and disconnect plug before cleaning/
maintenance or if (extension) cord is damaged or
entangled
5 DANGER Rotating blades; keep hands out of openings
while tool is running
6 Pay attention to the risk of injury caused by flying
debris (keep bystanders a safe distance away from work
area)
7 Wait until all moving tool components have come to a
complete standstill before touching them
8 Wear protective gloves
9 Wear protective glasses and hearing protection
0 Do not expose tool to rain
! Double insulation (no earth wire required)
@ Do not dispose of the tool together with household waste
material
GENERAL
• This tool can be used by
children aged 8 and above and
0770
by persons who have physical,
sensory or mental limitations
or a lack of experience or
knowledge if a person
responsible for their safety
supervises them or has
instructed them in the safe
operation of the tool and they
understand the associated
dangers (otherwise, there is a
danger of operating errors and
injuries)
• Supervise children (this will
ensure that children do not play
with the tool)
• Cleaning and user
maintenance of the tool shall
not be made by children
without supervision
• Be familiar with the controls and the proper use of the tool
• Never allow children or people who are not familiar with
the operating instructions to use the tool (local
regulations can restrict the age of the operator)
• Never operate the tool in the direct vicinity of persons;
stop using the tool when persons (especially children) or
pets are nearby
• The user is responsible for accidents or hazards
occurring to other people or their property
• Always switch off tool, disconnect plug from power
source, and ensure that all moving parts have come to a
complete standstill
- whenever leaving the tool unattended
- before clearing jammed material
- before checking, cleaning or working on the tool
! before mounting or removing the collection bag
ELECTRICAL SAFETY
• Always check that the supply voltage is the same as the
voltage indicated on the nameplate of the tool
• Inspect the cord periodically and have it replaced by a
qualified person, if damaged
• Inspect the extension cord periodically and replace it, if
damaged (inadequate extension cords can be
dangerous)
• When operating the tool use a residual current device
(RCD) with a triggering current of 30 mA maximum
• Only use an extension cord of types H05VV-F or
H05RN-F which is intended for outdoor use and
equipped with a watertight plug and coupling-socket
• Only use extension cords with a maximum length of 20
metres (1,5 mm²) or 50 metres (2,5 mm²)
11