Washing Instructions - oneConcept 10006738 Manual De Instrucciones

Step 2: Pump out half
1. Place the laundry in the spin drum. Larger garments should be on the
bottom.
2. Close the cover for safety.
3. Close both the inner and outer covers. Lay out the drain hose.
4. Set the spin time according to the amount of laundry.
Step 3: Spin
1. Place the laundry in the spin drum. Larger garments should be on the
bottom.
2. Press down the pressure cover of the spinner. Otherwise laundry may fall
out of the spin cycle.
3. Close both the inner and outer covers. Lay out the drain hose.
If you hear unusual noises, stop the spin cycle and reposition the laundry. As
soon as you open the cover, the spin should stop. The drain hose must be laid
out first, otherwise the water that has been spun out cannot drain off.
Step 4: Pump out
1. Drain the water completely.
2. Pull the power plug out of the socket.
3. Open the cover to allow the washing drum to dry.
4. Remove the lint filter and clean it.

WASHING INSTRUCTIONS

Dissolve washing powder directly
1. Add the washing powder when the water level is low.
2. Select a programme.
3. Start the machine and let the water mix for 1 minute.
4. After the washing powder has dissolved completely, you can let in more
water.
5. Select the correct washing time.
EN
15