Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
fig. 12
If you wish to create a new recipe,
+
press the
icon (fig. 12), then follow
the steps indicated.
For the recipe to be stored, it is
necessary to at least enter the title of
the recipe.
If you wish to edit a recipe, press the
icon and then press on the recipe
to be edited.
If you wish to delete a recipe, press the
icon and then press on the recipe
to be deleted.
To view the recipe, keep pressing the
name of the recipe for two seconds.
If you are viewing a recipe, to return
to the Main Menu quickly, press the
"control/back" icon
want to return to the recipe you were
viewing, press the Extras icon
at the top a direct access to that recipe
will be displayed.
Planner
To create an event on a specific date,
press for one second on the chosen
day and follow the steps indicated.
Utilities
If you access the Utilities Menu the
Notepad, Info and Instruction Manual
options will be displayed.
Notepad
To create a note, press the "add"
option and follow the steps indicated.
To delete a note, press on the note and
slide your finger to the left. A "trash"
icon will be displayed; press this icon
to delete the note.
Info
If you access the Info Menu, the
Instruction Manual and Consumption
options will be displayed.
Consumption
If you access this menu while cooking,
you can see the energy being
consumed at that moment.
If you access this menu when the
cooktop does not have any active
zones, you can consult the energy
consumed during the last cooking
session.
Power Management
There is a Power Management
function. This function makes
it possible to limit the total power
generated by the cooker to different
values chosen by the user.
Every time the level of a zone is
, then, if you
changed, the power manager will
calculate the total power being
and
generated by the cooker. If it has
reached its total power limit, the touch
screen will not allow you to increase
the level of that zone. The cooker
will emit a beep and will display a
message indicating the maximum
power level that can be selected. If
you wish to exceed this value, you
must lower the power of other zones;
sometimes it is not enough to reduce
just one other level, as it will depend on
the power of each zone and their level.
It is possible that, in order to raise the
power level of a large zone, you have
to reduce the levels of several others.
If you use the function to access
the maximum level, and this value
is above the value imposed by the
limitation, the zone will operate at the
maximum level possible. The cooker
will emit a beep and will display a
message indicating the maximum
level that can be configured.
If you access the Settings Menu,
the Language, Date/Time, Screen
Brightness, Reset Default Values,
Sound and Sleep Mode Configuration
options will be displayed.
function
Settings
Date/Time
If you access the Settings Menu, the
Date/Time and Stopwatch options will
be displayed.
Sound
If you access the Sound Menu, the
alarm sound Duration and Silence
Keyboard options will be displayed.
Silence Keyboard
This deactivation will not apply to all
functions, such as for example the
on/off and the timer finished beep.
Safety switch off function
If due to an error one or several
heating zones do not switch off, the
appliance will be automatically discon-
nected after a set amount of time (see
table 1).
Table 1
MAXIMUN
Selected power
OPERATING TIME
level
(in hours)
0
1
2
3
4
5
6
7
8
9
10 or 5 minutes,
P
readjusts to level 9
(depending on model)
* Depends on model
When the "safety switch off "
function has been triggered, in the
corresponding area, an H is displayed,
if there isa burn risk.
Keep the control panel of the
EN
0
8
8
5
4
4
3
2
2
1
29
Publicidad
Tabla de contenido
