Information Concerning Disposal; Disposal Of Packaging; Disposal Of Your Old Appliance; Scope Of Delivery - Bosch B11CB50SSS Instrucciones De Uso

Ocultar thumbs Ver también para B11CB50SSS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Information concerning
disposal

* Disposal of packaging

The packaging protects your appliance from damage
during transit. All utilized materials are environmentally
safe and recyclable Please help us by disposing the
packaging in an environmentally friendly manner.
Please ask your dealer or inquire at your local authority
about current means of disposal.

* Disposal of your old appliance

Old appliances are not worthless rubbish! Valuable raw
materials can be reclaimed by recycling old appliances.
,
WARNING:
Redundant appliances
1. Pull out the mains plug.
2. Cut off the power cord and discard with
the mains plug.
3. Do not take out the trays and receptacles:
children are therefore prevented from climbing
in!
4. To prevent children from becoming locked in
the redundant appliance:
Remove appliance doors!
5. Do not allow children to play with the
appliance once it has spent its useful life. Risk
of suffocation!
Refrigerators contain refrigerant and gases in
the insulation. Refrigerant and gases must be disposed
of professionally. Ensure that tubing of the refrigerant
circuit is not damaged prior to proper disposal.

Scope of delivery

After unpacking all parts, check for any damage
in transit.
If you have any complaints, please contact the dealer
from whom you purchased the appliance or our
customer service.
The delivery consists of the following parts:
Free-standing appliance
Interior fittings (depending on model)
Bag containing installation materials
Operating instructions
Installation instructions
Customer service booklet
Warranty enclosure
Information on the energy consumption and noises

Installing the appliance

Have a technician install and connect the appliance
according to the enclosed installation instructions.
,
WARNING:
Do not install this appliance:
outdoors,
in an environment with dripping water,
in rooms where there is a risk of frost.

Transporting

The appliances are heavy and must be secured during
transportation and installation.
Because of the weight/dimensions of the appliance
and to minimise the risk of injuries and damage
to the appliance at least two persons are necessary
to set-up the appliance securely.

Installation location

A dry, well ventilated room is suitable as an installation
location. The installation location should not be
exposed to direct sunlight and not placed near a heat
source, e.g. a cooker, radiator, etc. If installation next
to a heat source is unavoidable, use a suitable
insulating plate or observe the following minimum
distances from the heat source:
To electric or gas cookers 1
To an oil or coal-fired cooker 11
The floor of the installation location must not give way;
if required, reinforce floor.

Ventilation

The air on the rear panel and on the side panels of
the appliance heats up. Conduction of the heated air
must not be obstructed. Otherwise the refrigeration unit
must work harder. This increases power consumption.
Therefore: Never cover or block ventilation openings!
en-us
/
" (3 cm).
1
4
/
" (30 cm).
13
16
5

Publicidad

Tabla de contenido
loading

Tabla de contenido