Publicidad
Idiomas disponibles
Idiomas disponibles
Manuale del d'uso ed installazione – Cleaner2
( GB ) DEFECT
THE STEAM DOES NOT COME OUT EVEN IF THE BOILER IS IN PRESSION.
A) The gun connection switch is disconnected:
-- Press the switch (6).
B) The steam adjusting handwheel is closed:
-- Unscrew this handwheel in a clockwise direction.
C) The cable of the gun is damaged:
-- Replace the cable checking the connections on the clamp.
D) The electrovalve coil is burned (2):
-- Replace the coil and check the working of the valve.
E) The push-button of the gun is defected:
-- Replace the push-button checking the connections.
THE BOILER DOES NOT GO IN PRESSION EVEN IF THE GENERAL SWITCH (7) IS
CONNECTED.
A) There is no water inside the boiler:
-- Switch the machine off, make sure that there is no pression, unscrew the
plug and execute the filling.
B) The element is burned or it does not work properly:
-- Check the element and replace it if necessary.
C) The pressure switch does not work properly:
-- Check the tube of the pressure switch: it must be perfeclty free.
If necessary replace the pressure switch.
STEAM COMES OUT OF THE SECURITY VALVE
A) The gasket of the valve is hardened or cracked:
-- Replace the gasket or the security valve (each 2 years).
B) The pression is too high:
-- Check the pressure switch and the safety-thermostat (we suggest to turn to
a specialized centre).
C) The security valve is damaged:
-- Because of the importance of this component we suggest to replace it without
hesitation.
NOTE
In course of consultation of the drawing of the exploded view, it is possible to obtain the code number by
looking for the reference number (placed near the drawn component) and by consulting the column
"NR.LEG." of the list.
The gun is contemplate as accessory, so is out of guarantee.
del 12-2013 - C:\Documenti\MANUALI D'ISTRUZIONI E DOC\SETTORE DENTALE\CLEANER\CLEANER 2\MANUALI
D'ISTRUZIONI\Cleaner2-R01_5373.doc
Pag. 13 di 16
Publicidad
