Publicidad
Idiomas disponibles
Idiomas disponibles
®
NOTE: This page applies to existing media:scape
tables. If this is a new installation, start on page 3.
INSTALL the Virtual PUCK SERVER
1.
a) Use a hex drive to remove screws, then b)
remove the cover from the underside of the table top.
NOTE:
1.
edia:scape table must be unplugged prior to removing
the cover. Please note that some media:scape tables use two
cords and the installer should be sure to unplug both.
2.
The media:scape table mains plug will be considered the
disconnect device for both the table and the irtual
disconnect device shall remain readily
the user.
3.
WARNING: To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or moisture.
he
to
1a
5/16-18 x 7/8"
BUTTON HEAD SCREW
1b
Page 2 of 1
2329140 Rev G
Publicidad
