Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Product Safety Information
Intended Use:
A Cordless Task Light is a battery powered tool that is used to illuminate a limited
work area.
•
Responsibly recycle or dispose of Batteries. Do not puncture or burn Batteries.
Improper disposal may endanger the environment or cause personal injury.
•
Only use Tools with the appropriate voltage Ingersoll Rand batteries. Use of any
other batteries may create a risk of fire, personal injury or property damage.
•
Only use Ingersoll Rand charger with approved 9.6 - 19.2V NiMh or NiCd
batteries. Use of other batteries or chargers may create a risk of fire or may cause
battery to burst when charging. Personal injury or property damage may result.
•
The charger, including the cord, is not user serviceable. Repair should only be
carried out by an Ingersoll Rand Authorized Service Center. User service may
result in electric shock, fire and/or serious personal injury.
For additional information refer to Cordless Task Light Product Safety Information
Manual 04585188, Battery Charger Safety Information Manual 10567832, Battery
Safety Information Manual 10567840.
Manuals can be downloaded from www.irtools.com.
Replacing the Light Bulb
Figure 1
•
Always remove battery pack prior to servicing bulb.
•
Allow bulb to cool before changing. Bulbs get hot from use.
To replace the light bulb, first remove protective rubber boot and unscrew lens holder. Pull
bulb straight out and insert new bulb. Reinstall lens holder and protective boot.
EN-1
WARNING
Protective Boot
Lens Holder
(2528-K1011)*
Bulb
*Used for both models
(2528 & 2529)
CAUTION
Lens
(2528-K1010)*
80200942_ed1
Publicidad
