Jeep Wrangler 2007-2010 - Metra 95-6511 Instrucciones De Instalación

Jeep Wrangler 2007-2010

1. Unclip and remove the lower center trim
below A/C controls. (Figure A)
2. Remove (2) Phillips screws exposed
behind lower center panel. (Figure A)
3. Unclip and remove the upper center
trim starting towards the rear of the
panel. (Figure A)
4. Remove (2) Phillips screws exposed
behind upper center panel. (Figure A)
5. Unclip and remove entire panel
surrounding radio and climate controls,
including A/C vents.
6. Remove (4) 7 mm screws securing
radio. Unplug and remove radio.
(Figure B)
NOTE: The top of the metal bracket
in the sub dash will need to be cut to
allow for the clearance of the Double
DIN radio's chassis.
Continue to kit assembly
Dash Disassembly 95-6511
(Modifications to radio cavity required)
20
1
2 3 4 5
(Figure A)
(Figure B)
6