Kit Assembly; Double Din Head Unit Provision; Stacked Iso Din Head Unit Provision - Metra 95-6511 Instrucciones De Instalación

Double DIN head unit provision

1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets/trim
plates to the Double DIN radio using the
screws supplied with the radio.
(Figure A)
3. Reassemble dash in reverse order
of disassembly.
Stacked ISO head unit provision
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets/trim
plates to the stacked ISO units using the
screws supplied with the units.
(Figure A)
3. Reassemble dash in reverse order
of disassembly.

Kit Assembly 95-6511

22
(Figure A)
(Figure A)