Metra 99-7622HG Instrucciones De Instalación

Nissan rogue 2014-up

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

INSTALLATION INSTRUCTIONS FOR PART 99-7622HG
Nissan Rogue 2014-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted High Gloss Black Metallic
KIT COMPONENTS
• A) Radio housing • B) Brackets • C) Pocket • E) (4) #8 x 3/8" Phillips screws
B
A
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 Nissan Harness
Antenna Adapter: • 40-NI12 Nissan Antenna Adapter
METRA. The World's best kits.
APPLICATIONS
99-7622HG
C
1-800-221-0932
Dash Disassembly
– Nissan Rogue 2014-up ........................................ 2
Kit Assembly
– ISO DIN radio provision with pocket ..................... 3
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
D
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
Table of Contents
© COPYRIGHT 2014 METRA ELECTRONICS CORPORATION

Publicidad

Tabla de contenido
loading

Resumen de contenidos para Metra 99-7622HG

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 99-7622HG APPLICATIONS Table of Contents Nissan Rogue 2014-up 99-7622HG Dash Disassembly – Nissan Rogue 2014-up ........2 Kit Assembly – ISO DIN radio provision with pocket ..... 3 KIT FEATURES • ISO DIN radio provision with pocket •...
  • Página 2: Dash Disassembly

    99-7622HG Dash Disassembly 1. Unclip and remove the trim panel 4. Unclip and remove the A/C control. on the end of the passenger side of (Figure D) the dash. (Figure A) 5. Unclip and remove the trim panel 2. Remove (1) Phillips screw securing to the left of the factory radio.
  • Página 3: Kit Assembly

    (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 99-7622HG NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
  • Página 5: Herramientas Requeridas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7622HG AplicAciones Indice Nissan Rogue 2014 y mas 99-7622HG Desmontaje del tablero – Nissan Rogue 2014 y mas........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 cArActerísticAs del kit •...
  • Página 6: Desmontaje Del Tablero

    99-7622HG Desmontaje del tablero 1. Desenganche y quite el panel de 4. Desenganche y quite el control del moldura que está al final del lado aire acondicionado. (Figura D) del pasajero en el tablero. 5. Desenganche y quite el panel de...
  • Página 7: Ensamble Del Kit

    (Figura B) 3. Ubique el arnés de cableado de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad...
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-7622HG EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido