Metra 99-7626HG Instrucciones De Instalación

Installation instructions for part 99-7626HG
Nissan Pathfinder 2013-up
(Without NAV and with the factory climate controls above the radio controls)
KIT FEATURES
• ISO DIN radio provision with pocket
• DDIN radio provision
• Built and painted in multiple colors to match the
factory color and appearance
KIT COMPONENTS
• A) Radio housing trim panel • B) Radio brackets • C) ISO Pocket • D) (4) #8 x 3/8" Phillips screws
• E) (2) White panel clips
A B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-7552 Antenna Adapter: • 40-NI12
METRA. The World's best kits.
99-7626HG
C
®
D
E
metraonline.com
U.S. PATENT # D788,764
Table of Contents
Dash Disassembly ................................................. 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
– DDIN radio provision ............................................ 3
TOOLS REQUIRED
• Panel removal tool
• Phillips screwdriver or drill with long Phillips bit
• T-20 Torx screwdriver
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION