Kit Assembly - Metra 99-7622HG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the pocket to the brackets
with the provided (4) #8 x 3/8"
Phillips screws. (Figure A)
2. Attach the aftermarket radio to the
pocket/bracket assembly with the
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Mount the new radio/pocket
assembly into the dash then snap
the radio housing over the radio
assembly.
5. Reassemble dash in reverse order
of disassembly.
99-7622HG

Kit Assembly

(Figure A) (Figure B)
3