Initial Operation; Operating Modes - Skil LL0511 Manual Del Usuario

OBJ_BUCH-2101-001.book Page 18 Friday, January 10, 2014 2:31 PM
Operation

Initial Operation

 Protect the measuring tool against moisture and direct sun light.
 Do not subject the measuring tool to extreme temperatures or var-
iations in temperature. As an example, do not leave it in vehicles for
long time. In case of large variations in temperature, allow the measur-
ing tool to adjust to the ambient temperature before putting it into oper-
ation. In case of extreme temperatures or variations in temperature, the
accuracy of the measuring tool can be impaired.
 Avoid heavy impact to or falling down of the measuring tool. Dam-
age to the measuring tool can impair its accuracy. After heavy impact or
shock, compare the laser lines with a known horizontal or vertical refer-
ence line.
 Push the switch for automatic levelling 2 to the
transporting the measuring tool. This locks the levelling unit, which
can be damaged in case of intense movement.
Switching On and Off
To switch on the measuring tool, press the On/Off button 5. Immediately
after switching on, the measuring tool sends a laser beams out of the exit
opening 1.
 Do not point the laser beam at persons or animals and do not look
into the laser beam yourself, not even from a large distance.
To switch off the measuring tool, press the On/Off button 5 repeatedly un-
til the automatic levelling indicator 6 goes out. Slide the automatic levelling
switch 2 into position to lock the levelling unit .
 Do not leave the switched on measuring tool unattended and switch
the measuring tool off after use. Other persons could be blinded by
the laser beam.
When not using the measuring tool, switch it off in order to extend the bat-
tery life.

Operating Modes

Once switched on, the measuring tool is in operating mode with automatic
levelling or in the operating mode without automatic levelling .
To change the line styles, press the operating mode button 5 repeatedly
until the desired mode is set.
18 | English
position when
1 619 92A 06Y • 10.1.14