Ryobi RLT30CESC Manual De Utilización página 16

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
Name
Safety Alert Symbol
Read Your Operator's Manual
Wear
protection
Ricochet, Keep Bystanders Away
No blade
RPM Decal
Boots
Gloves
No Smoking
Petrol
Lubricant
Mix Petrol and Lubricant
Switch
English(Original instructions)
SYMBOLS
eye, hearing and head
Explanaton
Indicates danger, warning or caution. It means attention!!!
Your safety is involved.
Your manual contains special messages to bring attention
to potential safety concerns as well as operating and
servicing information. Please read all the information
carefully to ensure satisfaction and safe use.
Wear eye, hearing and head protection when operating
this equipment.
Beware of thrown or flying objects. Keep all bystanders,
especially children and pets, at least 15m away from the
operating area
The product is not intended for use with a toothed saw
type blade.
Do not use metal blade (s) on the product
Rotational direction and maximum speed of the shaft for
the cutting attachment.
Wear non-slip safety footwear when using this equipment.
Wear non-slip, heavy-duty gloves.
Do not smoke when mixing fuel or filling fuel tank.
Use unleaded gasoline intended for motor vehicle use
with an octane rating of 91 ([R+M]/2) or higher.
Use full synthetic 2-stroke lubricant for air cooled engines.
Mix the fuel mix thoroughly and also each time before
refuelling.
On/Off Switch
I = ON to Run
O = OFF to Stop
13