Classification Of Blood Pressure; Use The Memory Function; To Read The Memory Values - Norditalia BP-510 Manual Del Usuario

5. Press the " " button
The appliance will automatically turn off after 30 seconds if not used.
NOTE: To stop the inflation or measurement, press the " " button
anytime. The unit will stop inflating and then release and turn off.

Classification of Blood Pressure

After each measurement is completed, the LCD display will show your
position automatically on the six segments of the bar indicator which
corresponds to World Health Organization (WHO) Risk Indicator.
Reference Material: Journal of Hypertension 1999, Vol 17 No.2
Diastolic Blood Pressure (mmHg)
Severe hypertension
Moderate hypertension
Mild hypertension
Normal systolic value
Normal blood pressure
Optimal blood
pressure
(target value)
Note:
When a person's systolic and diastolic pressures fall into different
categories, the higher category should apply.

Use the Memory Function

After every measurement the appliance memorizes the measured blood
pressure and pulse rate with date and time. It can store up to
BP-510: 60 sets of measurements (30 for each of the 2 memory areas).
BP-520: 180 sets of measurements (90 for each of the 2 memory areas).
14
0900378031_EN_BP-510_520_ed.05_2015_draft00.indd 14-15
to turn off the unit.
WHO
Red
Yellow
Green
Systolic Blood Pressure (mmHg)
When all sets of an area are full, the oldest memory will be deleted. The
unit also calculates the average of
BP-510: last 3 measurements.
BP-520: last 3 measurements, all measurements of selected area, morning
(AM) measurements of selected area, afternoon (PM) measurements of
selected area.
Please select desired memory area before reading the memory.

To read the memory values

With the appliance turned off, press the "M" button repeatedly to show:
BP-510
- L3: the average value of the last 3 measurements
of the selected memory area.
- 01-30 : single measurement from the most
recent (01) to the oldest (30).
BP-520
- L3: the average value of the last 3 measurements of
the selected memory area.
- ALL: the average value of all measurements of the
selected memory area.
- AM: the average value of the morning measurements
(0:00-12:00) of the selected memory area.
- PM: the average value of the afternoon measurement
(12:00-24:00) of the selected memory area.
15
05/06/2015 9.12.24