Matco Tools MNTS13 Instrucciones De Ajuste

WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
INTENDED USE OF THE TOOL
This tool is intended to be used to install metric M5, M6, M8 and
SAE 10-24, 1/4-20, 5/16-18 rivet nuts. Do not use this tool outside of
the designed intent. Never modify the tool for any other purpose
or use.
BEFORE USE
Before use, check the parts diagram and part number listing on
page 4 to make sure all parts are included. If any parts are missing
or damaged, please call your distributor.
PRODUCT INFORMATION
• Work faster. Change mandrel sizes by hand without wrenches
using unique quick-change design.
• Comprehensive coverage. Includes metric sizes M5, M6 & M8 and
SAE 10-24, 1/4-20 & 5/16-18 mandrels, nose pieces and 10 piece
rivet nuts each.
• Maximum strength. Patented structure outputs 30 times the
input force.
• Shorter handle with double compound hinges that maximize leverage.
• Ergonomic grip for easy operation.
SPECIFICATIONS
Weight: 2.43 lbs. (1100g)
Length: 13" (330mm)
DO NOT DISCARD – GIVE TO USER
13" NUT/THREAD
SETTER KIT
MADE IN CHINA
to Matco specifications
Max. Working Stroke: 9mm
Arm Force Multiplier: 30
Page 1
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user against
defective material or workmanship for a period of 1 year from the
date of purchase.
The manufacturer reserves the right to determine whether the part
or parts failed because of defective material, workmanship or other
causes. Failures caused by accident, alteration or misuse are not
covered by this warranty.
The manufacturer, at its discretion, will repair or replace product
covered under this warranty free of charge. Repairs or replacements
of products covered under this warranty are warranted for the
remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by
unauthorized service representatives voids this warranty. The rights
under this warranty are limited to the original user and may not be
transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular
purpose. Some states do not allow the exclusion or limitations of
incidental or consequential damages, so the above limitations may
not apply to you.
Caution: To help prevent personal injury
Use of this product can expose you to chemicals including ethylene
glycol, gasoline vapors and engine exhaust, which are known to the
State of California to cause cancer, birth defects, or reproductive
harm. For more information, visit www.P65Warnings.ca.gov.
Always wear ANSI approved safety equipment, safety glasses and
clothing when using this product. Study, understand, and follow all
instructions provided with this product. Failure to read and follow
all warnings and operating instructions may result in damages and
serious injury or death.
• Always wear ANSI approved goggles when using this product
(users and bystanders).
• Never use this tool for any application other than for which
it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool, modification
of the tool or use of the tool with accessories not designed for it
could result in serious injury or death.
• Always select the correct accessories of the correct size and
design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and adequately
equipped area.
• Do not begin repairs without assurance that vehicle is in secure
position and will not move during repair.
MNTS13
1508128-14MA