Cuisinart SB2E Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 44
cooking time by pressing the '+' or '-' buttons. Every
time you press on one of these buttons, you will
hear a beep and the time will increase or decrease
by one minute. By holding the button down, you
can scroll through the time quickly.
N.B.:You can increase or decrease the cooking time
using the '+' and '-' buttons at any time during the
cooking cycles.
Temperature control
by pressing the button
sary.
o
: cooking at about 80°C
o
: cooking at about 90°C
o
: cooking at about 110°C
will start the cooking cycle immediately for the
programmed time.
indicator light will flash and a beep will sound to let
you know that the cooking cycle is finished.
N.B: The temperature may be changed at any time
during the heating or cooking cycle.
Stir button
heating or cooking cycle. You may also use it when
the unit is in 'stand-by' mode when adding ingre-
dients to the glass jar.
fry onions, garlic or other basic ingredients used at
the beginning of your recipe.
as many times as neces-
Blender speed
ting dial on the control panel to activate the blen-
der function.
Select the speed you wish to use by turning the dial
clockwise. You can reduce the speed by turning the
dial anticlockwise.
the dial to the 'pulse' position.
SPEED
NUMBER OF
REVOLUTIONS /
1
2
3
4
Pulse
activated when the cooking process is complete.
cooking stage by using the
pressing the
button.
cient, but do not exceed speed 2.
on the lowest speed and gradually increase the
speed to 4 or until you have the desired consistency.
N.B. Do not use the blender for more than three
minutes. This is the maximum time for the motor. If
the blender function is used for longer than 3 conti-
nuous minutes, the unit will shut itself down.
USE
MINUTE
11 000
Mix liquids/Mix
hot foods
15 000
18 000
Mix solid foods
21 000
21 000
Crush ice
function.
-
-
15

Publicidad

Tabla de contenido
loading

Tabla de contenido