Tronsmart T6 Plus Manual Del Usuario página 5

Press to switch music playing modes between Bluetooth, Aux-in, Micro SD card and USB flash
drive.
Hold for 5 seconds until a sound prompt is heard to clear all paired devices and reset to
factory default settings.
BLUETOOTH
1. Power on the speaker, the Bluetooth indicator will light blue and flash rapidly. The
speaker has entered the Bluetooth pairing mode.
2. Turn on the Bluetooth on your device, scan for new Bluetooth devices and upon
discovering 'Tronsmart Element T6 Plus' tap to pair with it. You will hear a sound prompt
after pairing successfully, and the blue indicator will be kept on.
3. Hold the TWS button for 3 seconds to disconnect the Bluetooth.
TWS MODE
What is TWS?
TWS is true wireless stereo which means two Element T6 Plus speakers are able to be
paired together to play music simultaneously to provide 3D stereo surround sound.
How to pair two Element T6 Plus speakers?
1. Turn on two speakers and confirm they are disconnected to any Bluetooth devices.
2. Tap the TWS button once of either speaker, you will hear a sound prompt and the
yellow LED flashes, which means two speakers have entered TWS pairing mode and will
pair with each other automatically during a few seconds.
3. Then go to device's Bluetooth settings, scan for 'Tronsmart Element T6 Plus' and tap to
pair.
How to disconnect TWS mode?
Tap the TWS button once again to disconnect two speakers from each other. After
disconnecting successfully, you will hear a sound prompt and the yellow LED of two
speakers turned off.
USB-A POWER BANK FUNCTION
This speaker carries a USB charge out function that will automatically detect your device
and begin to charge it when the charging cable is plugged into the USB-A port. The output
power is up to DC 5V/1A. In order to maintain stable music playing performance, it's not
recommended to use the music and power bank function at the same time.
AUX-IN MODE
The speaker also features one AUX-IN port. Simply connect the speaker with your
non-Bluetooth audio devices with the 3.5mm audio jack cable.
Note: During Bluetooth mode, it will automatically switch to AUX-IN mode when plugging
in the audio cable.
TF/MICRO SD CARD MODE
The speaker will play the music from your TF/Micro SD card when plugging the card into
the slot.
03