What Does The Beep Mean - Symbol QRG LS 2100 Serie Manual De Instrucciones

L S

What Does The Beep Mean?

When you hear 1 beep (short high tone) it means data has been
decoded successfully. If any other beeps are heard, contact the
technical person in charge of scanning.
Troubleshooting
If the scanner does not work after you've followed these operating
instructions:
• Check the system power.
• Check for loose cable connections.
• Be sure the scanning system is programmed to read the type of
bar code you are trying to scan.
• Check to be sure the symbol is not defaced.
Cleaning
1RWH
LS 2100 series scanners require no user maintenance.
Wipe the scanner window periodically with a lens tissue or other
material suitable for cleaning optical material, such as eyeglasses.
&DXWLRQ
Do not pour, spray or spill any liquid on the scanner.
2 1 0 0
Right
S e r i e s
Wrong
4