Albrecht Tectalk easy Manual Del Instrucciones página 21

7 PTT switch (Push-to-Talk) –
press this button to transmit.
8 Scan – starts automatic channel
scan to find busy channels
9 integrated microphone
10 Loudspeaker
Getting Started
Carefully remove your radio from its
packing. If there is any visible
damage, do not attempt to operate
this radio. Contact Your dealer or
return it to the place of purchase.
Removing and installing the BELT
CLIP:
Pull the belt clip latch away from the
unit.
While pulling the belt clip latch, push
up on the belt clip to remove it from
the unit.
To re-install the belt clip later again,
slide the belt clip into the belt clip slot.
A "click" indicates the belt clip is
locked into position.
Open the battery compartment and
insert batteries
Release
compartment
latch located on the
rear side of the unit
the battery
cover