Albrecht Tectalk easy Manual Del Instrucciones página 25

•
Refer to the "Channel and frequency
table" at the end of the manual for
detailed frequency listings.
Switching transmit power
For short distance communication, we
recommend to use reduced power
(this will save a lot of battery power).
•
The display will show
(depending on the last used setting)
•
•
You will see
have selected Low Power, and no
extra icon if Your choice was the
standard High power setting.
Monitoring weak signals:
You can use the MONITOR feature to
check for weak signals in the current
channel, where the automatic squelch
channel changes from 1 to 8,
or from 8 to 1.
Press the enter PTT button to
confirm the selected channel
and return to the NORMAL
mode.
To switch between Hi power
and Low power press
Press
press
power.
Confirm setting with PTT.
L
to move to a high or
to move to Low
in the display if You
2 x.
H
or
L