Bosch ACT550 Manual Original página 43

_______________________________________________________________________ Flushing kit

Unscrew the filter clamp (3).

Unscrew the filter (4).

Unscrew the adapter for the quick-release coupling (5).

Screw the adapter for the quick-release coupling (5) to the new filter using Loctite
542. Tighten to a torque of 15Nm.

Close the drain valve (1) and screw the cap.

Clean the pipe of the flushing canister blowing compressed air towards the filter.
5
Operating instructions
3
1
5 4
en
43