Installation Steps; Care And Cleaning - Auto Ventshade Aerovisor Instrucciones De Instalación

Installation Steps

Align visor to the previously cleaned surface. With the visor in its
final position, remove the remaining tape liner by pulling on free
3
4 Piece Set
Clean the painted surface of the window
frame with an alcohol pad, and wipe dry
Alcohol
Prep
Pad
Manufactured for Auto Ventshade
Lawrenceville, GA
5
Align visor to the previously cleaned surface. With the visor in its
final position, remove the remaining tape liner by pulling on free
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
™
NOTE: Actual application may vary slightly from illustrations.
ends.
with a soft cloth.
ends.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade
TM TM
Apply pressure along all flange edges to ensure good adhesion.
4
Peel back 2" (5 cm) of tape liner from each end of the visor
6
Apply pressure along all flange edges to ensure good adhesion.
8
Repeat Steps 1-8 for opposite side.
logo and the AVS logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
flange.