AUTO STOP
The AUTO STOP feature allows the turntable to automatically stop
playing when the STYLUS (15) reaches the end of the record.
• To turn the AUTO STOP feature ON: Set the AUTO STOP CONTROL
SWITCH (6) to AUTO.
• To turn the AUTO STOP feature OFF: Set the AUTO STOP
CONTROL SWITCH (6) to MANUAL.
NOTE: When using the MANUAL setting, once the record is finished,
the player will continue to spin until you raise the TONEARM (2) and
move it back to the TONEARM REST (4) which stops the spinning.
CONNECTING TO AN EXTERNAL SPEAKER
Use the included Red & White RCA Cables to connect the turntable to
an External Speaker or Stereo system. Simply plug the Red & White
ends of the RCA Cable into the corresponding Red & White AUDIO
OUTPUT JACKS (12) on the rear of the player.
Then connect the other Red & White ends of the RCA Cable into
the corresponding Red & White Audio Input Jacks on your External
Speakers or Stereo system. The speaker requires a pre-AMP inside it.
USING HEADPHONES
To use headphones with this player, connect any headphone with a
3.5mm jack into the input on the 3.5mm HEADPHONE JACK (11)
located on the rear of the player.
• NOTE: When headphones are plugged in, no sound will be heard
from the built-in speakers.
8