Reattaching The Refrigerator Doors; Disassemble The Freezer Drawer - Samsung RF26J7500 Serie Manual Del Usuario

3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
(5)
(7)
4. Lift the door straight up to remove.
5. Remove the screw ( 8 ) attached to the
lower left and right door hinges with a philips
screwdriver (+).
Remove the 2 hex head bolts ( 9 ) attached to
the lower left and right door hinges with an allen
wrench (3/16").
Remove the lower left and right door hinges
( 10 ).
(10)
(8)
(9)
Allen wrench
DA68-02601D-00.indb 12
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors after you have moved
the fridge to its final location, assemble the parts in
reverse order.
1. The Water Line must be fully inserted into the
(6)
center of the transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
2. Insert the clip in the install pack, and then
confirm that it holds the line firmly.
Center of Transparent
DISASSEMBLE THE FREEZER
DRAWER
1. Take out the upper drawer by lifting it up.
2. Take out the lower basket ( 2 ) by lifting the
basket up from the rail system.
English - 12
Type A Type B
Dispenser
The Guide Lines
coupler
clip A (1/4") clip A (1/4")
(6.35 mm) (6.35 mm)
(2)
14. 11. 24. 11:08