Probe; Oven Light - GE PT9200 Manual Del Propietário

Probe

The temperature probe may be cleaned with soap and
water or a soap-filled scouring pad. Cool the temperature
probe before cleaning. Scour stubborn spots with a
soap-filled scouring pad, rinse and dry.
To order additional temperature probes read the
Assistance and Accessories sections at the beginning of
this manual.
during a self clean cycle.

Oven Light

SHOCK OR BURN HAZARD:
WARNING
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
CAUTION
bare hands or a damp cloth can cause burns.
To remove:
1. Turn the glass cover counterclockwise 1/4 turn until
the tabs of the glass cover clear the grooves of the
socket. Wearing latex gloves may offer a better grip.
pulling it straight out.
To replace:
exceed 50 watts. Replace the bulb with the same
replacement bulb is rated 120 volts or 130 volts
Oil from skin will damage the bulb and shorten its life.
3. Push the bulb straight into the receptacle all the way.
4. Place the tabs of the glass cover into the grooves of
the socket. Turn the glass cover clockwise 1/4 turn.
For improved lighting inside the oven, clean the
glass cover frequently using a wet cloth. This should
be done when the oven is completely cool.
5. Reconnect electrical power to the oven.
20
Receptacle Socket
Tab
Glass cover
Receptacle
or cloth
49-80786-1