GE PT9200 Manual Del Propietário página 23

Ocultar thumbs Ver también para PT9200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting tips ...
Problem
Possible Cause
Oven light does not
Light bulb is loose or defective.
work
Pad operating light is broken.
Oven will not
The temperature is too high to set a
self-clean
self-clean operation.
Oven controls improperly set.
Excessive smoking
Excessive soil or grease.
during clean cycle
Excessive smoking
Food too close to burner element.
during broiling
Oven door will not
Oven too hot.
open after a clean
cycle
Oven not clean after
Oven controls improperly set.
a clean cycle
Oven was heavily soiled.
"LOCKED" flashes
The self-clean cycle has been selected
in the display to
but the door is not closed.
cook
"LOCKED" will flash while the oven door
is locking to start self-clean.
"LOCKED" is on
The oven door is locked because the
when you want to
temperature inside the oven has not
cook
dropped below the locking temperature.
"LOCKED" appears
The controls have been locked.
in the oven display
"F— and a number
You have a function error code.
or letter" flash in
the display
If the function code repeats.
Display goes blank
A fuse in your home may be blown or the
circuit breaker tripped.
The clock is turned off.
Oven is in Sabbath Mode.
Power outage,
Power outage or surge
clock flashes
"Burning" or "oily"
This is normal in a new oven and will
odor emitting from
disappear in time.
the vent
Strong odor
An odor from the insulation around the
inside of the oven is normal for the first
few times the oven is used.
Fan noise
A cooling fan may automatically turn on.
My oven door glass
No. The inner oven glass is coated with
appears to be
a heat barrier to reflect the heat back
"tinted" or have a
into the oven to prevent heat loss and
"rainbow" color. Is
keep the outer door cool while baking.
this defective?
49-80786-1
What To Do
Tighten or replace bulb.
Call for service.
Allow the oven to cool and reset the controls.
See the Cleaning the Oven section.
Touch the Cancel/Off pad. Open the windows to rid the
up the excess soil and reset the clean cycle.
Allow the oven to cool below locking temperature.
See the Cleaning the Oven section.
Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
Close the oven door. Wait for oven door to finish
locking.
This is normal.
Touch the Cancel/Off pad. Allow the oven to cool.
Touch the Cancel/Off pad. Allow the oven to cool for one
hour. Put the oven back into operation.
repeats, call for service.
Replace the fuse or reset the circuit breaker.
See the Special Features section.
Verify that the oven is not in Sabbath Mode.
See the Special Features section.
it by touching the Cancel/Off pad, setting the clock and
resetting any cooking function.
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the Cleaning the Oven
section.
This is temporary and will go away after several uses or
a self-clean cycle.
This is normal. The cooling fan will turn on to cool
oven is turned off.
see this tint or rainbow color.
23

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Pt9200slss

Tabla de contenido