Black and Decker GWC54PC Manual Del Usuario página 4

Safety instructions
Using your appliance
Warning! When using mains-powered/
cordless appliances, basic safety pre-
cautions, including the following, should
always be followed to reduce the risk of
material damage.
Read all of this manual carefully before
operating the appliance.
The intended use is described in this
manual. The use of any accessory
or attachment or the performance
of any operation with this appliance
other than those recommended in this
instruction manual may present a risk
Retain this manual for future refer-
ence.
Always take care when using the appli-
ance.
Always use safety glasses or goggles.
Never allow children, persons with
reduced physical, sensory or mental
capabilities or lack of experience and
knowledge or people unfamiliar with
these instructions to use the machine,
local regulations may restrict the age
of the operator. Never operate the ma-
chine while people, especially children,
or pets are nearby
Do not allow children or animals to
come near the work area or to touch
the appliance or power supply cord.
Close supervision is necessary when
the appliance is used near children.
This appliance is not intended for use
supervision.
Intended use
ENGLISH
Your BLACK+DECKER GWC54PC, GWC54PCB blower
have been designed for leaf clearing. These appliances are
intended for consumer use only.
4
fire, electric shock, personal injury and
u
u
of personal injury.
u
u
u
u
u
u
by young or infirm persons without
(Original instructions)
Residual risks.
This appliance is not to be used as a
toy.
Only use the appliance in daylight or
Use in a dry location only. Do not allow
the appliance to become wet.
Avoid using the appliance in bad
weather conditions, especially when
there is a risk of lightning.
Do not immerse the appliance in water.
Do not open the body casing. There
are not user-serviceable parts inside.
Do not operate the appliance in
explosive atmospheres, such as in the
or dust.
The appliance is only to be used with
the power supply unit provided with the
appliance.
Additional residual risks may arise when
using the tool which may not be included
in the enclosed safety warnings.
These risks can arise from misuse, pro-
longed use etc.
Even with the application of the relevant
safety regulations and the implementa-
tion of safety devices, certain residual
risks can not be avoided. These include:
Injuries caused by touching any rotat-
ing/moving parts.
parts, blades or accessories.
of a tool. When using any tool for
prolonged periods ensure you take
regular breaks.
Impairment of hearing.
Health hazards caused by breathing
dust developed when using your tool
(example:- working with wood, espe-
cially oak, beech and MDF.)
u
u
good artificial light.
u
u
u
u
u
presence of flammable liquids, gases
u
u
Injuries caused when changing any
u
Injuries caused by prolonged use
u
u
u