Installation Options; Battery Installation - Panacom PA-7300M Manual Del Usuario

hard-wired outlets requires additional converters (not included). The
dealer from whom you purchased the system, or a telephone supply
store, can advise you regarding the proper converter.
PHONE NUMBER LINE 1 LINE 2 PHONE NUMBER

INSTALLATION OPTIONS

Although you can use your Panacom 2-line speakerphone with a
single phone line, it is designed with a 2-line system in mind. The
following diagrams show two possible systems:
2 Lines on a Single Modular Jack
The most common two-line phone system uses a single RJ14 modu-
lar jack which contains both phone lines.
2 Lines on Separate Modular Jacks
It is possible that each line has its own RJ11 modular jack, which means
that you will need a 2-line coupler in order to use both lines on this
phone. Check with your local phone dealer to get a two-line coupler.

BATTERY INSTALLATION

The installation of the 4 AA optional
batteries allows the normal perfor-
mance of the special functions of
this phone.
Without the battery:
• Line indicators, Call ringer detec-
tion and Conference mode does not
work
• Memory redial function does not
work.
Battery Installation
1. Remove the base plate by press-
ing down the tabs and lifting it from
the base.
2. Press down with a flat tool or coin
on the tabs for the battery compart-
ment lid and lift up.
3. Insert the batteries as shown in the di-
agram inside the battery compartment.
Pg. 6