Product Information - Trust PW-5040S Manual Del Usuario

User's manual

Product information

A: On/Off button
i
B: Status LED
- Green LED
- Red LED
Installation
Connect power cable (C) to wall power socket
1
Push On/Off button for 2 seconds
2
- Connect PC power cable to (D) Backup Battery outlets
3
- Connect devices like modems and printers to (E) Surge Protect only outlets
Reminder
Charge UPS for 8 hours before using!
UPS is charged only when AC power is supplied and UPS is on!
Fully discharge then recharge the battery every 3 months for longer battery life!
Backup time is related to the connected devices and battery condition!
Conductive device, like laser printer, is suggested to connect to the Surge Only output!
Specification
Model
Operation type
Output capacity
Input
Voltage range
Frequency
Output
Frequency
Freq. regulation
Surge current protection [J]
Maximum surge current
[Amp]
Transfer time (typical)
C: Power cable
D: Backup Battery outlets
E: Surge Protect only outlets
F: Reset button ( press after surge shutdown )
15833
Line Interactive
400VA / 180W
230 VAC
187 ~ 253 VAC
50/60 Hz
187 ~ 253 VAC
50/60 Hz
Auto sensing
220 J
10000 A
10 ms typical
1
15899
600VA / 250W