Connecting The Device - Conceptronic C54NETCAM2 Guía De Instalación Rápida

ENGLISH
Connecting the cables
• Connect one end of the supplied network cable to the device and the other end to your
computer or router.
• Connect the supplied power supply to the device and power socket. After you have
connected the power supply, the orange 'Power' LED will turn on and the 'Activity' LED
will start flashing green.
Note: To configure the C54NETCAM2, it is recommended to make a connection with the
LAN cable in stead of the wireless connection.

6. Connecting the Device

22