Conceptronic C54NETCAM2 Guía De Instalación Rápida página 28

ENGLISH
• Click on the 'Next' button to go to the 'Wireless Networking' page.
Note: This only applies to the C54NETCAM2. If you have a CNETCAM2, you can skip this
and continue at the next point about 'Confirm Settings'.
The following options can be set or changed:
- Network ID (SSID)
- Wireless Mode
- Channel
: Here you can enter the SSID of the wireless network that you
want to have the C54NETCAM2 connect to. You can also press
the 'Site Survey' button on the right to let the device search
for available networks. When your network is listed, double
click on the SSID to select it.
: Choose 'Ad-Hoc' when the device needs to connect directly
to a PC or notebook. In all other cases (for instance a router
or gateway), choose the 'Infrastructure' option.
: This option only applies to the 'Ad-Hoc' mode. When in 'Ad-
Hoc' mode you need to select the right channel to be used for
both the C54NETCAM2 and the other device it will connect to.
28