Conceptronic C54NETCAM2 Guía De Instalación Rápida página 29

ENGLISH
- Authentication
- Encryption
- Format
- Key Length
- WEP key 1 to 4
When you've selected 'WPA-PSK' or 'WPA2-PSK' under 'Authentication', some of the
above options are not mentioned anymore and/or replaced by the option mentioned
below.
- Encryption
- Pre-Shared Key
: Leave this option at 'Open' when there is no security enabled
on the wireless router or access point to which the device
connects. This can be checked under the 'Site Survey'. When
the 'Privacy' option states 'No', there's no wireless
authentication needed. Otherwise refer to the settings of the
router to select the right option.
: Select 'WEP' when 'Shared-Key' is chosen under
'Authentication'. Otherwise select 'None'.
: Choose the method in which the encryption key is handled.
ASCII is alfanumeric, HEX is hexadecimal. This only applies to
a WEP secured wireless network.
: Choose the length of the encryption key. This only applies to
a WEP secured wireless network.
: Enter the router's WEP encryption key(s) here with a
maximum of 4 keys. This only applies to a WEP secured
wireless network.
: Select 'TKIP' for 'WPA-PSK' authentication or 'AES' for
'WPA2-PSK' authentication.
: Enter the router's WPA or WPA2 encryption key here.
29