Conceptronic C54NETCAM2 Guía De Instalación Rápida página 27

ENGLISH
• Click on the 'Next' button to go to the 'E-mail Setting' page.
The following options can be set or changed:
- SMTP Server Address
- Sender E-mail Address
- Authentication Mode
- Sender User Name
- Sender Password
- Receiver #1 E-mail Address : Enter the e-mail address of the first person who
- Receiver #2 E-mail Address : Optionally enter the e-mail address of the second
Note: If you do not want to use the e-mail option, you can leave all fields blank.
: If you want to use the e-mail notification option, you can
enter the server for outgoing e-mail here. For example:
"smtp.myemail.com", where 'myemail' is the name of your
ISP. The correct settings can be obtained from your ISP.
This server address must be corresponding with the 'Sender E-
mail Address' entered below.
: Enter the e-mail address of the user who will send the e-mail.
For example: "name@myemail.com".
: If the e-mail server needs authentication (login info) for
outgoing e-mail, select 'SMTP'. Otherwise leave it 'None'.
: Enter the user name corresponding with the e-mail address
entered under 'Sender E-mail Address'.
: Enter the password for the e-mail address that is entered
under 'Sender E-mail Address'.
will receive the e-mail.
who will receive the e-mail.
27