Hardware Installation - Conceptronic CHDDLANU Manual De Usuario

ENGLISH
In order to use the CHDDLANU as USB Network Storage Adapter, you need to connect it to your network
and to your USB storage device.
A. Connect the RJ45 LAN cable to your CHDDLANU and to your network device (switch, router, etc.)
B. Connect the USB Cable of your USB storage device to the CHDDLANU and to your USB storage device.
C. Connect the power supply of the CHDDLANU to the CHDDLANU and to a free wall outlet.
The Power LED of the CHDDLANU will turn on.
D. Set the CHDDLANU USB switch to ON. The USB port of the CHDDLANU is now set to enabled.
Now you can proceed with the driver & software installation in chapter 4.

3. Hardware installation

USB
13
Power
Network