Mopar 82212110 Instrucciones De Montaje página 2

2
PROCEDURE STEPS
1. Disconnect and isolate the battery negative cable.
2. Using a trim stick or another suitable wide flat­bladed
tool, release the six lower retaining clips (3) and care­
fully pry the trim panel (1) away from the inside of the
liftgate (4).
3. Carefully release the upper retaining clips (2) and sep­
arate the trim panel completely from the liftgate.
4. Disconnect the trim panel lighting connectors.
5. Remove the liftgate lower trim panel from the vehicle.
6. Remove flip glass weather strip.
7. Remove the upper trim panel (2) using a trim stick or
another suitable wide flat­bladed tool, carefully pry the
trim panel away from the inside of the liftgate (1) to
release the fasteners that secure the panel to the lift­
gate.
8. Locate and remove four fasteners from the back of the
light bar assembly (1).
9. Disconnect the wiring harness.
10. Remove the light bar from liftgate.
Jun 16, 2010 K6860985 ver. 1