Plantronics A20 Guía Para El Usuario página 12

•a20APLABody3 12/16/01 8:58 PM
CONFIGURATION SETTING
The electronic configuration of telephone systems can vary.
You can optimise the performance of your Amplifier by stepping
through the four configuration settings. The Configuration Dial
is located on the right side of the Amplifier behind the Handset
Jack.
Place a call to a co-worker and while speaking turn the
Configuration Dial clockwise until you achieve the best sound.
12
A paper clip can be used to make turning the compatibility dial
easier.
Experimenting with these four settings will not harm the amplifier
or your telephone.
EarCons AUDIBLE CUES
Your Amplifier provides both visual and audio feedback for all
operator adjustments. EarCons provide audio feedback in the
form of different toned beeping sounds for different functions.
Double beeps indicate the ends and mid point ranges of each
function.
The intensity of the EarCon Audible Cue can be increased,
lowered, or turned off (Three levels plus Off).
Simply hold down the Mute Bar
Rocker Switch ( decreases volume or turns off EarCon;
2 3
increases EarCon Volume).
Even though the user hears the EarCon, the calling party
does not.
Page 10
12
then depress the Volume
6
10
TROUBLESHOOTING
I CANNOT HEAR A DIAL TONE
F
Press the Headset/Handset Bar.
Check that all connections are correct and firmly in place.
Ensure Headset is centred on your ear.
Adjust Configuration Dial
A
I PLUGGED EVERYTHING IN BUT THE
LIGHTS WON'T COME ON
Plug the AC adapter into another wall outlet or test the outlet using
a lamp.
Press the Headset/Handset bar
make sure adapter is in headset mode.
THE LIGHTS ARE ON BUT I CAN'T HEAR
E
ANYTHING WHEN I LIFT THE HANDSET
Turn the Configuration Dial
adapter clockwise through each of the four positions until you hear
dial tone.
Check that all the cables are completely plugged in and in the
correct jack.
Press the purple mode button and listen for a musical beep. If you
don't hear these musical beeps there could be something wrong
with the headset or adapter–call 1-831-458-7700.
I HEAR A DIAL TONE WHEN I LIFT
THE HANDSET BUT THERE'S ALSO
A RASPING NOISE
Turn the Configuration Dial
clockwise to the next setting. (There are four settings.)
Setting (see page 10).
12
at the front of the adapter to
7
on the left-hand side of the
12
on the left hand side of the adapter
12
11