Residual Risks; Assembly; Assembling The Slide Shoe; Operation - Deltafox DP - CJS 2025 Traducción Del Manual De Instrucciones Original

GB
• Keep your workplace clean. Material
mixtures are particularly dangerous.
Light metal dust can burn or explode.
8) SAFETy inSTRUCTiOnS FOR
hAnDLinG ThE LASER
Caution: Laser radiation - Do not
look into the beam - Laser class 2
The marking is located on the back of
the device next to the notches for mitre
angles (9). The warning is on the device
housing directly above it.

9) RESiDUAL RiSKS

Even if properly operating and handling
this electric tool, some residual risks will
remain. Due to its construction and build,
this electric tool may present the following
hazards:
a) Lung damage, if suitable respiratory
protection is not worn;
b) Cuts
c) Ear damage if working without ear
protection.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer
periods of time or if the unit is not held
or maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
26
medical implant before operating
the machine.
Warning! Observe the safety
information in the operating
instructions for your DELTAFOX
20V Li-ion series rechargeable
battery.

Assembly

Only insert the rechargeable
battery when the device is com-
pletely assembled. if the device
is switched on accidentally,
there is a danger of injury.

Assembling the slide shoe

When working on scratch-sensitive work-
pieces, working with the slide shoe (10) is
recommended
1. Place the shoe (10) on the front
of the bottom plate (11).
2. Now bring the rear part of the
shoe (10) up towards the bottom
plate (11) until it clicks into place.

Operation

Remove the battery from the
device before carrying out any
work on the power tool.
Checking the battery charge
level
The battery's (
ed by the charge state indicator (
The LEDs indicate the battery's charge
level. To do this, press the softkey (
of the charge level indicator (
6) charge level is indicat-
6).
5).
7)