Residual Risks; Further Safety Directions; Safety Functions - Deltafox DG-ECS 2240 Traducción Del Manual De Instrucciones Origina

GB

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the
risk of serious or lethal injuries,
we recommend that persons with
medical implants consult their doc-
tor and the manufacturer of their
medical implant before operating
the machine.

Further safety directions

• If the supply cord of this power tool is
damaged, it must be replaced by a spe-
cially prepared cord available through
the service organization.
• If it is necessary to replace the connec-
tion cable, we recommend that this be
performed by the manufacturer or an
authorised representative (e.g. author-
ised workshop, customer service, etc.).
• Lay the extension cable in such a way
that it will not be caught by branches or
similar during sawing.
• Use a surge protector (RCD) with a re-
lease current of 30 mA or less.
40
• Comply carefully with maintenance, con-
trol and service instructions in this manual.
Damaged protective devices and parts
have to be repared or changed except
as noted otherwise in this manual.
• It is recommended that a first-time user
at least practice the cutting of logs on a
saw log or frame.

Safety functions

A
1 Rear grip with hand guard (10)
Protects the hand against branches
and boughs in the case of springing
away by the chain.
3 Chain braking lever/hand guard
Control system, which stops the saw
chain immediately in case of a spring-
back; lever can also be activated
manually; protects the left hand of the
operator if it slides from the front grip.
The motor cannot be turned on if
the chain brake has engaged.
5 Saw chain with small spring-back
Helps you to catch spring-backs with
specially developed control systems.
17 Metal stop claw
Reinforces the stability when vertical
cuts are carried out and facilitates
sawing.
15 Electric motor
Double insulated for safety reasons.
13 On-off switch with safety chain
brake
On releasing the On/Off switch, the
device immediately switches off.
14 Switch-on block
The switch-on block must be released
for switching on the device.
18 Chain catcher
Decreases the danger of injuries if the
chain breaks or if it comes off.