Common Adjustments - AFG MULTI20 Instrucciones Para Instalacion, Uso Y Manteniniento

5. Tank lifting. The tank can only be moved
when the lid is fully raised
6. Tank lowering. The tank can only be moved
when the lid is fully raised
7. Automatic water filling (*). Press the button to
dispense water for a preset time. Press again
to stop filling
8. Rapid water filling (*). Water is dispensed for
the entire duration of button selection
9. Slow water filling (*)
(*) Water filling is only possible with the lid fully
raised and the tank fully lowered.
SPECIAL WARNINGS (Fig.3)
1. Advises the operator that the requested ma-
noeuvre cannot be performed because the lid
is not fully raised
2. Advises the operator that the tank is hot to
the touch
3. Advises the operator that the tank is pres-
surized: vent steam before opening. Important!
Do not open the lid while this warning persists
4. Some safety devices have been tripped:
contact a qualified technician
5. General warning
6. Some safety devices have been tripped:
contact a qualified technician
7. In the Pasta cooker, Slow cooking and Ste-
am cooking functions, this indicates that the
water has run dry: top up the tank and wait for
the temperature to return to normal operating
parameters

COMMON ADJUSTMENTS

Working temperature setting (Fig.4)
1. Current temperature
2. Set temperature
• The function screen displays the box Fig.4-A;
• Press to select the current temperature;
• The function screen displays the box Fig.4-B
(the background changes colour);
• Press and drag the red bar for rough settings;
• Press + or - for more precise settings;
The new value is stored (the background re-
verts to the initial colour):
• By pressing the current temperature;
• Or by not touching any button for a few se-
conds;
• Or by moving on to other adjustments.
Core probe temperature setting (Fig.5)
1. Current temperature
2. Set temperature
3. Core probe button
• The function screen displays the box Fig.5-A;
• Select the core probe button;
• The function screen displays the box Fig.5-B
(the background changes colour);
• Press to select the current temperature;
• Press and drag the red bar for rough settings;
• Press + or - for more precise settings;
The new value is stored (the background re-
verts to the initial colour):
• By pressing the current temperature;
• Or by not touching any button for a few se-
conds;
• Or by moving on to other adjustments.
To indicate that the appliance has reached the
set temperature, an acoustic signal sounds and
the message "End" is displayed. To eliminate
this message, press "End".
ATTENTION! Please be warned: the appliance
continues heating.
• To indicate that the appliance has reached the
set temperature, an acoustic signal sounds
and the message "End" is displayed;
• The function screen displays the box Fig.5-C
(the background changes colour);
• To eliminate this message, press "End".
• The function screen no longer displays Fig.5-
C.
Setting the power level (Fig.6)
3. Current power
• The function screen displays the box Fig.6-A;
• Press to select the current power;
• The function screen displays the box Fig.6-B
(the background changes colour);
• Press and drag the red bar for rough settings;
• Press + or - for more precise settings;
7