• Replace the faulty component.
Replacing the Wok inductor element
• Remove the control panel and front.
• Disconnect the inductor from the terminal board located on
the generator.
• Remove the inductor, lifting it downwards.
• Replace the faulty component.
Replacing the temperature regulator
• Remove the control panel.
• Replace the faulty component.
Replacing the generator
• Remove the control panel and front.
• Remove the generator and disconnect it.
• Replace the faulty component.
Replacing the glass ceramic hob
• In the event the glass ceramic hob is broken, contact our
company to have it replaced.
17 CLEANING THE INTERIOR
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
18 MAIN COMPONENTS
• Glass ceramic hob.
• Glass ceramic induction wok
• Indicator light.
• Inductor elements
• Generator
• RFI filter
9