cecotec Outsider DemiGod Manual De Instrucciones página 29

2. First, unscrew nut 1 and remove screw 2.
3. Place the handlebar and insert screw 2 with locking nut 1.
4. Lift the handlebar and press the shutter
spring 3, to place the handlebar's neck in its
correct position.
5. Insert the fixing lever in its groove and rotate
it until it is properly locked.
NOTE: to fold the handlebar again, carry out these
steps in reverse order.
ASSEMBLING THE HANDLEBAR GRIPS
Once the handlebar is assembled vertically,
the grips are suspended as shown on the
following figure.
1. Hold the left grip and pull it up until it is
inserted into its position.
manual outsider.indd 29
1
2
2. Repeat the before step with the right grip (the one
with the throttle).
3
29
16/10/18 18:38