cecotec Outsider DemiGod Manual De Instrucciones página 30

ADJUSTING THE HANDLEBAR'S HEIGHT
1. Turn the height-adjustment wheel
anticlockwise and raise or lower the
handlebar stem.
2. Once it is adjusted to the desired height,
turn the wheel clockwise to fix it. Make
sure the handlebar is tight.
ACCESSING AND ACTIVATING THE BATTERY
AND ENGINE
The battery and engine are already installed
and connected. To access to any of these,
lift the board. To activate the electric circuit,
insert the connector.
ASSEMBLING THE SADDLE
1. Introduce the saddle's frame in the saddle's
tube steering it into the groove. Align the
frame hole and insert the pin first, then,
turn it counter-clockwise, insert the stop
ring in the frame's u notch. Make sure the
tube is tight.
2. Insert the saddle into the tube and close
the lock (B). Make sure it is properly fixed.
NOTE: to fold the saddle again, carry out these
steps in reverse order.
30
manual outsider.indd 30
B
16/10/18 18:38