Electromagnetic Fields (Emf); Before First Use; Preparing For Use; Filling The Steam Tank - Philips GC6107 Manual Del Usuario

- Do not use any other cap on the steam tank than the cap that has
been supplied with the appliance, as the steam tank cap also functions
as a safety valve.
Caution
- Only connect the appliance to an earthed wall socket.
- Check the mains cord and the supply hose regularly for possible
damage.
- Always place and use the iron and the steam tank on a stable, level and
horizontal surface. Do not put the steam tank on the soft part of the
ironing board.
- The iron stand and the soleplate of the iron can become extremely
hot and may cause burns if touched. If you want to move the steam
tank, do not touch the stand.
- When you have finished ironing, when you clean the appliance, when
you fill or empty the steam tank and also when you leave the iron even
for a short while: put the iron on the iron stand, set the iron switch and
the steam tank switch to 'off ' and remove the mains plug from the wall
socket.
- Rinse the steam tank regularly according to the instructions in the
chapter 'Cleaning and maintenance'.
- This appliance is intended for household use only.

Electromagnetic fields (EMF)

This Philips appliance complies with all standards regarding electromagnetic
fields (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientific evidence
available today.

Before first use

1 Remove any sticker or protective foil from the soleplate and clean
the soleplate with a soft cloth.
 Fully unwind the mains cord and supply hose.
 Place the steam tank on a stable, level surface.
 Place the iron on the iron stand.

preparing for use

Filling the steam tank

Never immerse the steam tank in water.
Do not open the cap when the iron and the steam tank are still hot.
1 Remove the mains plug from the wall socket.
EnGlish
7