Magnusson 3663602850793 Manual De Instrucciones página 5

CAUTION!
• DO NOT attempt to repair or disassemble the laser-measuring tool. If
unqualified persons attempt to repair this product, serious injury may occur.
Any repair required on this laser product should be performed only by qualified
service personnel.
• DO NOT operate the tool in explosive environments, such as in the presence of
flammable liquids, gases or dusts. Sparks can be created in the tool which may
ignite the dust or fumes.
• ALWAYS turn off the instrument whenever it is not in use. Failure to do so
will increase the possibility of someone inadvertently looking directly at the
laser beam.
• DO NOT use optical instruments with this product, as this will increase risk of
injury to the eyes.
• DO NOT use laser viewing glasses as safety goggles, as they do not protect the
eyes against laser radiation.
• DO NOT use parts or accessories that have been designed for use with other
laser tools, as this could result in serious injury or loss of performance.
• The accuracy or performance of the instrument may be reduced if it is used
beyond it's designed range, or in strong lighting conditions.
• DO NOT expose the product to shock, continuous vibration or extreme hot or
cold temperatures, as this could damage the tool and/or cause serious injury to
the user.
• ALWAYS handle the laser product with care. Treat it as you would any other
optical device such as a camera or binoculars, and DO NOT touch the
lens directly.
02 To install batteries
• This instrument requires 2 x 1.5V AAA/LR03 batteries (not included).
• Remove the battery compartment cover.
• Insert the batteries paying attention to the polarity (+/-) marked on the compartment and batteries.
• Close the battery compartment cover.
SAAM10586 Line and Point laser level A5 V6R.indd 5
5
03/12/2020 15:33